Are mosquitos invading your customer’s backyard?
Enjoying the backyard can be an uphill battle. Mosquito carry dangerous diseases that are a threat to your customers’ enjoyment of the outdoors. This means repellent and protection are vital.
Enter the NuTone Haven Mosquito Repellent System. This fixture is simple to install and use and will go hand in hand with an outdoor lighting system.
How it works
Installation is simple. Each fixture comes with cable connectors and is installed using the same wiring methods as low-voltage lighting. This 12-volt system needs to be powered by a low-voltage lighting transformer and can be installed with existing landscape lighting systems if desired.
Allow your customer to control their mosquito repellent system separately from their outdoor lighting by setting up the dual timer so the repellent system is only on while they are outside.
Each fixture provides 110 square feet of coverage, creating a 12-foot sphere of repellency. Fixtures should be spaced 10 to 12 feet apart to create fixture-to-fixture coverage. The invisible and odorless vapor barrier that is created will keep mosquitos out of the coverage area.
Customers can start enjoying their backyards again as soon as 15 minutes after the systems are installed and working.
Each cartridge will last two and a half hours a day for 90 days.
With just one system your customer can safely enjoy their backyard all summer long!
Replacing the cartridge
When the fixture is working as normal, it will show a solid green light. If the cartridge needs to be replaced, the light will start blinking.
Replacing the cartridge is simple. Simply uncap and remove the old cartridge and replace it with a new one.
Happy customers mean happy contractors. With the NuTone Haven Mosquito Repellent System, helping your customers battle mosquitos is as easy as turning on their outdoor lighting. Don’t let mosquitos put a damper on outdoor plans any longer.
Watch this video on how to install the system!