FB Zoning And Dimmable 3 LED In Flat Black
FB-ZD-3LED-FB FRERE BEBE
SKU#:59300132 | MFG#:FB-ZD-3LED-FB
- The FB fits nicely into smaller landscapes or tight spaces
- Zoning and dimming capability using Luxor controller
- Available in 1 or 3 LED configuration
- Choose from 9 color finish options
|Ewing List Price||$209.00|
|Login to see Your Price|
Similar in style to its bigger brother the NP, the FB fits nicely into smaller landscapes and tight spaces. Accommodating up to a 3 LED Board, the FB offers all the same Up Light benefits of the NP in a more compact package. All FB up lights come standard with amber, green, blue and frosted filters. The FB includes choice of LED board, choice of finish, 5 ft lead wire and a Super Slot Spike.
Luxor LED Lighting
Create Any Ambiance. Anytime.
When Luxor ZD controls an LED landscape lighting system, lights don't simply turn on and off. They come alive. Luxor offers both zoning and dimming capabilities that provide virtually limitless design possibilities. Zoning allows lights to be programmed into preset vignettes, which can be activated for special occasions such as parties, or activities such as barbecuing. Dimming allows lights to automatically emit any desired illumination percentage anytime, anywhere within a system. So, Group 1 can be set to 100% illumination at 7:00 p.m., and automatically shift to 60% at 9:00 p.m., and so on.
Luxor's proprietary ZD Technology makes it the most versatile, affordable, and easy-to- use zoning and dimming control system ever created. It's the clear choice for the professional designer, and the most discerning clients.
All FX fixtures will work with the Luxor transformer; however for zoning and dimming capabilities ZD LED boards must be programmed and installed on each fixture. Non-ZD fixtures will turn on anytime a zone is programmed to come on. If incandescent fixtures are installed on the Luxor, these will be run on a higher than recommended voltage as the Luxor provides 14v to the field. The ZD fixtures can be ordered with the ZD LED board installed. The part number for ZD fixtures would have the ZD designation prior to the LED. An easy way to identify the board in the field is the color orange versus the standard board that is green.
Note: All Luxor compatible fixtures are marked with "ZD" connotation.
Halogen based lights can take anywhere between 10 and 50 watts of power each, and sometimes more. LED fixtures require, which roughly 80% less voltage, which means lower energy costs, longer lamp life, and better environmental citizenship for the end user.
As their watt consumption is significantly higher, traditional fixtures become very hot, so much so they cannot be touched after running for only a few minutes. LEDs create heat as well, but far less than traditional lighting. This results in a longer lamp and fixture life. To ensure our products live as long as possible, FX LED feature heat sinks, as well as temperature sensors. If a fixture is getting too hot, the FX board will automatically pull back current which will actively cool the fixture down.
Consistent Light Output
Traditional lighting required multiple wires to each set of lights to ensure all lights are outputting the same level of illumination. It is a complex and time-consuming process. With FX LED fixtures, a built-in device called a driver takes all the power it is receiving and delivers it to each LED within a fixture so they are always at the same light level, regardless of the voltage supplied.Fixture Life Length
Depending on the application LEDs can last 50,000 hours or more. At the end of their life they don't just burn out like a traditional lights. LEDs slowly dim over time and at very low levels, so even after 50,000 hours of use in most situations LEDs will continue to illuminate sufficiently.
|Number of LEDs||1||3||6||9|
|Halogen Output Equivalent||10 Watt||20 Watt||35 Watt||50 Watt|
|Useful LED Life||50,000 hrs. avg.||50,000 hrs. avg.||50,000 hrs. avg.||50,000 hrs. avg.|
|Input Voltage||10 to 15v||10 to 15v||10 to 15v||10 to 15v|