100-DV-A 1 in. Threaded Plastic Angle Valve with Out Flow Control

Rain Bird 100-DV-A 1 in. Threaded Plastic Angle Valve with Out Flow Control

100-DV-A PLST ANGL VLV W/O FC

SKU#:35005915 | MFG#:100DVA

  • Double-filtered pilot-flow design for maximum reliability.
  • Balanced-pressure diaphragm for long life.
  • Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter.
  • Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring.
Ewing List Price $31.04
Your Price -
qty

Rain Bird manufactures only the highest quality valves. Use DV/DVF series valves in locations where the use of a separate pressure vacuum breaker (PVB) or a double-check valve is required by city codes to protect against back flow. Check your local city codes to determine what type of valves are required. All of our valves work with any standard sprinkler timer.

Key Features

  • Double-filtered pilot-flow design for maximum reliability.
  • Balanced-pressure diaphragm for long life.
  • External bleed to manually flush system of dirt and debris during installation and system start-up.
  • Internal bleed for spray-free manual operation.
  • Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter.
  • Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring.
  • Accepts latching solenoid for use with Rain Bird battery-operated controllers.
  • Pressure: 15 to 150 psi (1,0 to 10,4 bar)
  • 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
    • 0.30 A inrush current; 0.23 A holding current.
  • Solenoid coil resistance: 38 Ohms.
  • Available Models:
    • 3/4" (20/27) and 1" (26/34) standard in-line configuration.
    • 1" (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations.
    • 1" (26/34) Angle (A) configurations for flexible installations especially when sub-mains are deep.
    • 1" (26/34) Male-by-Male (MM) thread configuration for quick and easy manifolding.
    • 1" (26/34) Male-by-Barb (MB) and 1" Male-by-1.25" Barb male thread inlet by barb outlet configuration for installation with poly pipe.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account